Sump Pump Repair

If you’re in the market for a sump pump repair, then you’re probably wondering what a sump pump repair may cost. To perform a sump pump repairĀ  plumber will charge $528 to replace a 1/3 hp. A replacement to a submersible sump pump, which includes labor and material; but you can buy one and make the swap for $190, the cost of the sump pump replacement, and save roughly 64 percent.

This causes debris to enter into your pump and can result in interference with the pump’s on/off switch or float arm. The leading mechanical cause of sump pump problems is a switch problem. This occurs when the pump shifts from its position inside the basin, rendering the float ineffective

What normally causes a sump pump failure?

Have you ever heard of a basement flooding before? Or even worse yet, have you ever had your own sump pump fail and the end result is your basement flooding? Well, if you have a basement, there’s a pretty good chance that you’ll have if you have not had already, a sump pump failure. Sump pump’s are machinery, and like every other piece of machinery, sump pumps eventually malfunction, break and fail. Here are some of the most common reasons that a sump pump fails, and doesn’t do the job it is supposed to do.

1. Power Failure

Just as it sounds, if the power goes out and you have a home with a basement, there’s a good chance that your sump pump will fail and stop working. It’s that reason alone why it makes sense to have a battery back up sump pump.

2. The Sump Pump is the Wrong Size

Have you ever heard of having the right tool for the right job? Well, with sump pumps it works the exact same way. Submersible sump pumps come with different horsepower options. The sizes of sump pumps are: 1/3 horse power sump pump sizes, 1/2 horsepower sump pump sizes and 3/4 horsepower sump pump sizes.

3. Improper Installation

Even though it may appear an easy task, installation of a sump pump is not merely an open and shut action. Manufacturers instructions have to be followed to the letter. The moment they aren’t followed look to have some sort of malfunction or issue with the overall functionality of the piece of equipment.

4. Switch Problems

The leading mechanical root cause of sump pump problems is a switch issue. This occurs when the pump changes from its position inside the basin, providing the float inefficient. Drift is responsible for the smooth procedure of the on/off switch. Your sump pump relies upon both the switch as well as the float arm systems to run properly.

5. Lack of Maintenance

Generally, manufacturers recommend that submersible sump pumps be run at least once every 2-3 months. Take note, that in the instance that there is a back-up, battery powered sump pump, unplug the primary pump and run the back-up submersible pump to make sure it is in good working order and running properly.

Whenever you are testing your sump pump periodically, make sure to go outside to make sure it is discharging water. Why? Well, sometimes the pump can run but not pump any water. This means the impeller has disengaged from the pump shaft or the check valve is installed backwards. Replace the back up battery on your sump pump every 2-3 years. (Make sure not to let your battery backup to your backup sump pump not to sit on the ground. Otherwise you run the risk of the concrete running the battery down.)

6. Product Defect

There’s nothing that can be done about a defective product other than immediate replacement. Which is another reason to have a professional install your sump pump, that way any risk of voiding the manufacturers warranty being voided is eliminated.

Let’s face it, no matter what plumbing problems happen. Our job at darrinsplumbingtips.com is to keep you from going through as few plumbing problems as possible.